WBOX Technologies 0E-13D28 - Setting FTP Parameters

Web Operation
High-Resolution IR Camera
User Manual
60
Issue V1.0 (2018-05-11)
Parameter
Description
Setting
Sender E-
mail Address
Mailbox for sending emails.
[Setting method]
Enter a value manually.
Recipient_E-
mail_Address
1
(Mandatory) Email address of recipient
1.
[Setting method]
Enter a value manually.
Recipient_E-
mail_Address
2
(Optional) Email address of recipient 2.
Recipient_E-
mail_Address
3
(Optional) Email address of recipient 3.
Recipient_E-
mail_Address
4
(Optional) Email address of recipient 4.
Recipient_E-
mail_Address
5
(Optional) Email address of recipient 5.
Attachment
Image
Quality
A higher-quality image means more
storage space. Set this parameter based
on the site requirement.
N/A
Transport
Mode
Email encryption mode. Set this
parameter based on the encryption
modes supported by the SMTP server.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
No Encrypted
Step 3 Click Apply.

If the message "Apply success!" is displayed, and the system saves the settings.

If other information is displayed, set the parameters correctly.
----End
4.8.6 Setting FTP Parameters
Description
If the File Transfer Protocol (FTP) button is enabled, the device automatically sends the
snapped alarm JPG images to specified FTP server.
Procedure
Step 1 Choose Configuration > Network Service > FTP.