WBOX Technologies 0E-13D28 User Manual

Web Operation
High-Resolution IR Camera
User Manual
58
Issue V1.0 (2018-05-11)
Outside Port
Port of outside network.
[Setting method]
Enter a value manually in
map mode.
Outside IP Address
IP address of outside network.
N/A
State
Mapping status
N/A
Step 4 Click Apply.

If the message "Apply success!" is displayed, and the system saves the settings.

If other information is displayed, set the parameters correctly.
----End
4.8.5 Setting SMTP Parameters
Description
If the Simple Mail Transfer Protocol (SMTP) function is enabled, the device
automatically sends JPG images and alarm information to specified email addresses
when an alarm is generated.
Procedure
Step 1 Choose Configuration > Network Service > SMTP.
The SMTP page is displayed, as shown in Figure 4-30.

WBOX Technologies 0E-13D28 Specifications

General

Brand	WBOX Technologies
Model	0E-13D28
Category	IP Camera
Language	English