WBOX Technologies 0E-13D28 - Setting SVC Stream Parameters

High-Resolution IR Camera
User Manual
Web Operation
Issue V1.0 (2018-05-11)
27
Parameter
Description
Setting
The bit rate changes according to the
image complexity. The encoding
efficiency is high and the definition of
motion images can be ensured.
Bit Rate(500-
12000)
Indicates the value of the bit rate.
[Setting method]
Enter a value manually.
Image Quality
The video quality the camera output.
[Setting method]
Select a value from the
drop-down list box.
Step 3 Click Apply.

If the message "Apply success!" is displayed, and the system saves the settings.

If the message "Apply failed!" is displayed, you must apply for the Parameter
Configure permission from an administrator. For details, see4.10.1
4.4.2 Setting SVC Stream Parameters
Procedure
Step 1 Click Configuration > Stream > SVC Stream.
The SVC Stream page is displayed, as shown in Figure 4-9.
Figure 4-9 SVC Stream Configuration page
Step 2 Set the parameters according to Table 4-4.
Table 4-4 Stream configuration parameters
Parameter
Description
Setting
SVC Stream ID
The ID of the SVC stream.
[Setting method]
Select a value from the drop-