WBOX Technologies 0E-13D28 User Manual

Web Operation
High-Resolution IR Camera
User Manual
38
Issue V1.0 (2018-05-11)
Table 4-9 Camera parameters
Parameter
Description
Setting
Channel Name
Channel name within the
length of 0 to 32 bytes.
[Setting method]
Enter a value manually.
Video System
The options are as follows:

PAL: Used in Europe
and China mainland.

NTSC: Used in USA
and Japan.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
PAL
NOTE
Whether the video system
can be changed depends on
the device model.
Video Refresh Frequency
The options are as follows:

50 Hz: corresponds to
the PAL system.

60 Hz: corresponds to
NTSC system.
[Setting method]
Corresponds to the video
system.
Step 2 Enter a channel name.
The channel name must be within the length of 0 to 32 bytes, it is combined with digital and
character (except for some special character).
Step 3 Click .
The message "Apply success!" is displayed.
If the video system is modified, the message "The device will be restart, are you sure to
modify?" is displayed, and the system automatically saves the settings. The settings take
effect after the device restarts.
----End
4.4.8 Setting OSD Parameters
Description
The on-screen display (OSD) function allows you to display the device name, channel
ID and name, time, and other customized contents on videos.

WBOX Technologies 0E-13D28 Specifications

General

Brand	WBOX Technologies
Model	0E-13D28
Category	IP Camera
Language	English