WBOX Technologies 0E-13D28 - Page 63

High-Resolution IR Camera
User Manual
Web Operation
Issue V1.0 (2018-05-11)
61
The FTP page is displayed, as shown in Figure 4-31.
Figure 4-31 FTP page
Step 2 Click the button on to enable FTP.
Step 3 Set the parameters according to Table 4-19.
Table 4-19 FTP parameters
Parameter
Description
Setting
FTP
Upload
Indicates whether to enable the
FTP service.
[Setting method]
Click the button on.
[Default value]
OFF
FTP
Address
IP address of FTP server.
[Setting method]
Enter a value manually.
FTP Port
Port of FTP server.
[Setting method]
N/A
[Default value]
21
Account
FTP server account.
[Setting method]
Enter a value manually.
Password
FTP server Password.
[Setting method]
Enter a value manually.
FTP Path
FTP Path to save the JPG image.
[Setting method]
Enter a value manually.