WBOX Technologies 0E-13D28 User Manual

High-Resolution IR Camera
User Manual
Web Operation
Issue V1.0 (2018-05-11)
25
Parameter
Description
Setting
Video Encode
Type
The video codec determines the image
quality and network bandwidth required
by a video. Currently, the following
codec standards are supported:

MJPEG
MJPEG is a standard intra-frame
compression codec. The compressed
image quality is good. No mosaic is
displayed on motion images. MJPEG
does not support proportional
compression and requires large storage
space. Recording and network
transmission occupy large hard disk
space and bandwidth. MJPEG is not
applicable to continuous recording for a
long period of time or network
transmission of videos. It can be used to
send alarm images.

H.264
H.264 consists of H.264 Base Profile,
H.264 Main Profile, and H.264 High
profile. The performance of H.264 High
Profile is higher than that of H.264
Main Profile, and the performance of
H.264 Main Profile is higher than that
of H.264 Base Profile. If a hardware
decoding device is used, select the
appropriate codec based on the decoding
performance of the device.
H.264 High Profile has the highest
requirements on the hardware
performance, and H.264 Base Profile
has the lowest requirements on the
hardware performance.
H.265
H.265 is the new video encoding
standard ,it's the improvement standard
from H.264. H.265 improves the
streams, encoding quality and algorithm
complexity to make configuration as
optimization.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
H.264
NOTE
The H.264 High Profile
codec means high
requirements on the
hardware. If the hard
decoding capability is
low, use H.264 Main
Profile or H.264 Base
Profile.
Audio Encode
Type
The following audio codec standards are
supported:
[Setting method]
Select a value from the

WBOX Technologies 0E-13D28 Specifications

General

Brand	WBOX Technologies
Model	0E-13D28
Category	IP Camera
Language	English