High-Resolution IR Camera
User Manual
Figure 4-11 Local Network page
Step 2 Set the parameters according toTable 4-6.
Table 4-6 Local network parameters
IPv4 is the IP protocol that uses an
address length of 32 bits.
[Setting method]
Select a value from the drop-
down list box.
[Default value]
IPv4
The device automatically obtains
the IP address from the DHCP
server.
[Setting method]
Click the button on to enable
DHCP.
NOTE
To query the current IP address
of the device, you must query it
on the platform based on the
device name.
IP address that the DHCP server
assigned to the device.
To Next Page
Loading...
