Enable FTP Upload.
Procedure
Step 1 Choose Configuration >Alarm > Motion Alarm.
The Motion Alarm page is displayed, as shown in Figure 4-19.
Figure 4-19 Motion Alarm page
Step 2 Click the button on to enable motion alarm.
Step 3 Configure the motion interval.
Step 4 Configure the sensitivity.
Step 5 Configure the schedule time setting.
Method 1：Click left mouse button to select any time point within 0:00-24:00 from
Monday to Sunday as shown in Figure 4-19.
Method 2：Hold down the left mouse button, drag and release mouse to select the
schedule within 0:00-24:00 from Monday to Sunday.
To Next Page
Loading...
