High-Resolution IR Camera
User Manual
Figure 4-22 Record Policy page
Step 2 Set the parameters according to Table 4-11.
Table 4-11 Recording policy parameters
Enables schedule record that you can
configure the time policy.
[Setting method]
Click the button on to enable
schedule record.
[Default value]
OFF
Recording duration (in seconds) after
an alarm is generated.
[Setting method]
Enter a value manually.
Rule for saving recordings. The options
are as follows:
Cycle Store: Saves recordings in
cycles.
Save Days: Duration (in days) for
saving a recording. The duration can
be a maximum of 99999 days.
NOTE
The value 0 indicates that recordings are
not overwritten.
[Setting method]
Select a value from the drop-
down list box.
To Next Page
Loading...
