Webdyn WebdynSunPM - Page 167

167
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
Parameter
Description
Default value
• ethernet: uses the ethernet
connection
• modem: uses the 3G interface with
the embedded SIM card
This parameter cannot be empty
SERVER2_Type
The type of server to which the
concentrator is to connect for the Server 2
connection.
There are several different server types. It is
therefore important to select the right
server type.
The possible values are:
• ftp: FTP server
• sftp: SFTP server
• mqtt: MQTT server
• mqtts: secure MQTT server
• mqtts_aws: MQTTS server on “AWS
IoT”
• mqtts_gcloud: MQTTS server on
“Google Cloud IoT”
This parameter cannot be empty
ftp
WEB_Password
Password to access the configuration using
the concentrator web site.
high
Note that unless otherwise indicated, parameters can be omitted from the configuration file.
In that case the default value will be used by the concentrator as indicated by the file import.
When the concentrator writes the file and sends it to the FTP server, all the parameters are
re-established.