８７
Interface
Configure which interface user uses.
COM1 is to RS-232C, COM2, COM3 are to RS-485.
Baud rate/Parity/Stop Bit/Data Bit
In put suitable value according to external device.
6.4.5.1 PTZ Setup
Additional configuration for PTZ Address, PoirtPTZ
PTZ Home
Shift to Preset assigned if it has no movement in certain time while PTZ control.
PTZ Idle Time
If it has no movement during configured time, shift to PTZ Home.
PTZ Port
Select Port for PTZ
PTZ Address
Configure the address configured in PTZ.
6.5 Event Setup
There are 5 items such as event, Text, Sycn Event,Preset, System event.
To Next Page
Loading...