Weidmüller maxGUARD - Markers

9Manual maxGUARD2526740000/02/03.2018
3 Systemoverview | Markers
3.4 Markers
A wide range of markers are available as accessories for label-
ling equipment.
Module markers
The individual modules can be tted with WS-series terminal
markers (pitch dimension of 6mm).
ModuleswithWS10/6terminalmarkers
The following markers are available for the labelling:
– Markers for printing with Weidmüller PrintJet ADVANCED
(Order No.1324380000)
– Order No. 1818400000, WS10/6, white, PA66
– Markers for printing with Weidmüller THM MMP
(Order No. 2430820000)
– Order No. 2007160000, WS8/6MM, white, PC-ABS/
TPU
WAD group marker
The AMGPP separation plate can be tted with the WAD5
group marker.
The WEW35/2 end bracket and the AMGEP end bracket
can be tted with the WAD8 group marker.
SeparationplatewithWAD5groupmarker
The following markers are available for the labelling:
– Markers for printing with Weidmüller
PrintJet ADVANCED (Order No.1324380000)
– Order No. 1112910000, WAD5, white, PA66
– Order No. 1112920000, WAD5, yellow, PA66
– Order No. 1112940000, WAD8, white, PA66
– Order No. 1112950000, WAD8, yellow, PA66