32 243637000/00/02.17
Installation
2.3.2 Connecting to a Computer or
Computer Network
NOTE
Inadequate or no grounding can cause
malfunctions during operations.
Ensure that all computers and ca-
bles connected to the label printer are
grounded.
1 Connect the label printer to a computer or net-
work by a suitable cable.
Printersetup.pdf
2.4 Switching on the Device
When all connections have been made:
1 Switch the printer on at the power switch (1).
The printer performs a system test, and then
shows the system status Ready in the display.
Wf an error occurs during the system test, the
symbol , Critical fault and type of error
are displayed.
1
Fig. 5 Power Switch
To Next Page
Loading...
