33243637000/00/02.17
Control Panel
3 Control Panel
3.1 Structure of the Touch-
screen Display
It is advantageous, whenever possible, to
make adaptations to various print jobs in
the software.
The touchscreen display (1) indicates the current
status of the printer and the print job, indicates faults
and shows the printer settings in the menu.
By selecting the buttons on the touchscreen display
(1) settings can be made.
Two USB master ports (2) are positioned under the
touchscreen display (1).
Fig. 6 Touchscreen-Display
3.2 Operating the Touchscreen
Display
The touchscreen display is operated directly by
touch:
To open a menu or select a menu item lightly
touch the corresponding symbol.
display.
3.3 Symbols on the Start Dis-
play
Symbol Status Function
Ready
Ready Feeds a blank label
Ready After the end of a print job,
reprint the last label
Printing
label
Interrupt print job,
printer goes into „Pause“
state
Pause Continue the print job,
printer goes into „Printing
label“ state
Ready Delete internal memory,
the last label can no longer
be reprinted.
Printing
label
Cancel the active print job
and delete all print jobs
Pause
Table 1 Symbols on the Start Display
Ready
To Next Page
Loading...
Need help?
General
