42 243637000/00/02.17
Maintenance
7 Maintenance
7.1 Cleaning Instructions
WARNING
Risk of death via electric shock!
Disconnect the printer from the power
supply before performing any mainte-
nance work.
It is important to clean the thermal printhead regu-
larly. This guarantees a consistently good printed im-
age and reduces wear of the printhead.
Otherwise, the maintenance is limited to monthly
cleaning of the device.
NOTE
The printer can be damaged by aggres-
sive cleansers.
Do not use abrasive cleaners or sol-
vents for cleaning the external sur-
faces or modules.
print area with a soft brush or vacuum
cleaner.
The cover of the printer can be
cleaned with a standard cleanser.
7.2 Cleaning the Printhead
Cleaning intervals
direct thermal printing every media roll change
thermal transfer printing every ribbon roll change
Substances may accumulate on the printhead during
NOTE
Printhead can be damaged!
Do not use sharp or hard objects to
clean the printhead.
Do not touch protective glass layer of
the printhead.
CAUTION
Risk of injury from the hot printhead line.
Ensure that the printhead has cooled
down before starting cleaning.
1
Fig. 14 Printhead Line
1 Lift the printhead.
2 Remove labels and transfer ribbon from the
printer.
3 Clean printhead line (1) with rubbing alcohol and
a soft cloth.
4 Allow printhead to dry for 2–3 minutes before
commissioning the printer.
To Next Page
Loading...
Need help?
General
