Weiler E1650 - Page 138

1
WEILER E1650 REMIXING TRANSFER VEHICLE
5-46
Maintenance
5
Maintenance Procedures
Storage Conveyor Footshaft Sprockets
1. Open both storage hopper cleanout doors.
2. Turn engine off and remove ignition key.
3. Perform sprocket inspection.
Discharge Conveyor Headshaft Sprockets
1. Lower discharge conveyor completely and open
cleanout doors.
2. Turn engine off and remove ignition key.
3. Perform sprocket inspection.
Discharge Conveyor Footshaft Sprockets
1. Lower discharge conveyor completely and open
cleanout doors.
2. Turn engine off and remove ignition key.
3. Perform sprocket inspection.