Weiler E1650 - Page 73

WEILER E1650 REMIXING TRANSFER VEHICLE
3-23
Operating Instructions
3
Paving
10. Squeeze trigger and move Propel Lever (8) fully
forward.
11. Center Propel Speed Dial (9).
The following screen will appear.
12. Press and hold Distance-From-Paver Button (7)
until transfer vehicle movement occurs.
The following screen will appear.
Once distance control is activated and transfer
vehicle has begun to move, release Distance-From-
Paver Button (7).
The “Set Distance” parameter is established. The
distance control system is now controlling the
distance between transfer vehicle and paver.
WARNING
Runover possible. Machine can crush. Machine moves automatically when
Distance-From-Paver Control is engaged.
Ensure path of machine is clear of personnel before engaging Distance-
From-Paver Control. Keep others away.
7
8
9
Distance Control Setup
Exit
Hold Distance Control
Button Until Forward
Machine Movement Occurs
Distance Control Setup
Exit
! Distance Control Now
Active !