Weinmann LIFE-BASE Series User Manual

138 EN LIFE-BASE
WM 68331 04/2021
7 Disassembly
Removing the ventilator and MEDUCORE Standard
2
Applies to • MEDUMAT Standard
2
• MEDUVENT Standard
• MEDUMAT Easy
CPR
• MEDUCORE Standard
2
Required auxiliary
equipment
Screwdriver with crosshead PH1
Requirement Disassembly is prepared (see "7.5.1 Preparing disassembly",
page 123).
1. With LIFE-BASE 1 NG XL:
• Undo the knurled screws.
• Pull out the hangers.
• Tighten the knurled screws.
2. Place the portable unit and devices with the control panel
membrane facing down.
Figure without devices

Weinmann LIFE-BASE Series Specifications

General

Brand	Weinmann
Model	LIFE-BASE Series
Category	Medical Equipment
Language	English