14 EN LIFE-BASE
WM 68331 04/2021
3 Description
3.1.3 LIFE-BASE 1 NG XS
No. Name Description
1 Handle Serves to lift and carry the portable unit.
2 Spacer plate Serves to fasten the devices on the portable unit.
3 Cross-bar Serves to fasten the portable unit to the wall mounting.
4 Loop for tension belt (long)
Serves to fasten the low-pressure hose of the ventilator if you are not
using a protective bag.
5 Loop for tension belt (short)
Serves to fasten the breathing circuit of the ventilator if you are not
using a protective bag.
6 Charging interface Charges the device on the portable unit.
To Next Page
Loading...
Need help?
General
