30 EN LIFE-BASE
WM 68331 04/2021
4 Assembly
4. If available: Feed the breathing circuit through the opening
on the protective bag.
5. Close the magnetic locks or hook and loop fasteners on
the front and back of the protective bag.
Result The protective bag is attached to the portable unit.
4.1.4 Attaching the protective bag for LIFE-BASE III,
LIFE-BASE 3 NG and LIFE-BASE 4 NG
1. Place the portable unit on a flat, firm surface.
2. Position the portable unit with the rear in the protective
bag (1).