WIKA UPT-20 User Manual

3
WIKA operating instructions process transmitter, model UPT-2x
14111166.02 04/2015 EN/DE
EN
Contents
1. General information ...............................................6
2. Design and function ...............................................7
2.1 Design .................................................................7
2.2 Description..............................................................7
2.3 Scope of delivery.........................................................8
3. Safety ...........................................................9
3.1 Explanation of symbols....................................................9
3.2 Intended use ............................................................9
3.2.1 Special conditions for safe use......................................10
3.3 Personnel qualification ...................................................10
3.4 Risks in hazardous areas .................................................11
3.5 Handling of hazardous media..............................................11
3.6 Labelling, safety marks...................................................11
4. Transport, packaging and storage ..................................13
5. Commissioning, operation ........................................14
5.1 Mechanical mounting ....................................................14
5.1.1 Requirements for mounting point ....................................14
5.1.2 Mounting the process transmitter....................................15
5.2 Electrical installation .....................................................17
5.2.1 Safety instructions ................................................17
5.2.2 Requirements for connection cable ..................................17
5.2.3 Requirements regarding intrinsic voltage supply........................18
5.2.4 Opening the case.................................................18
5.2.5 Shielding and grounding ...........................................18
5.2.6 Connection......................................................19
5.2.7 Pin assignments..................................................20
6. Display and operating unit, model DI-PT-U ...........................21
6.1 Design and description...................................................21
6.2 Accessing/exiting the operating menu.......................................21
6.3 Installation/Removal .....................................................22
6.4 Setting the main display ..................................................23
6.5 Setting the additional display ..............................................24
7. Configuration without display and operating unit .....................25
7.1 Performing a mounting correction (offset)....................................25
7.2 Configuring over HART
®
interface..........................................26
Contents

WIKA UPT-20 Specifications

General

Brand	WIKA
Model	UPT-20
Category	Transmitter
Language	English