Maintenance3303−4/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
4/ 7
D Working platforms 94142 must be removed before tilting the connecting rod
and turning the crankshaft.
⇒ Tilt the connecting rod about 20_ towards fuel side by pulling manual ratchet
’H2’ and slackening manual ratchet ’H2a’.
⇒ Detach manual ratchet ’H2’ from RUD-eye bolt ’RC2’ in connecting rod.
⇒ Turn crankshaft 15_ in counter-clockwise direction.
⇒ Tilt the connecting rod towards fuel side by slackening manual ratchet ’H2a’
until manual ratchet ’H2’ with round sling 94049A can be mounted by means
of shackles 94572I between suspension ’c’ and RUD-eye bolts ’RC2’. Tighten
manual ratchet ’H2’ and remove manual ratchet ’H2a’.
WCH00390
C
c
H2a
H2
RC2
H2
94572I
94049A
2013 / V2
Removal and Fitting
To Next Page
Loading...
