EasyManua.ls Logo

Woom OFF 4 - Installing the Reflectors; Optional Modifications to Your Bike; Retrofitting a Dropper Seatpost

Woom OFF 4
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instructions for use 37
EN
How to set up your fork
When adjusting the damping, always start with the lowest rebound and compression damping (= highest deection
or compression speed) and increase these in small incremental steps (do not adjust rebound and compression at the
same time). Then have your child ride a test stretch several times to check and compare the settings. When adjusting
the rebound damping, the fork should extend slightly slower than it compresses. To check, push the fork down
with the handlebars in a sudden motion with the front brake applied and allow the fork to deect without applying
pressure to the handlebars. Depending on whether the fork rebounds too slowly or too quickly, increase or decrease
the rebound damping. When adjusting the compression damping, the suspension fork should not bottom out or
compress to the stop under any circumstances on large obstacles and jumps. If the fork does bottom out, increase
the compression damping and also check the air pressure setting in the suspension fork.
5.2.9 Installing the reectors
Attach the clip-on reectors to the
spokes.
Mount the white reector on the handlebars and the red reector on the seatpost.
5.3 Optional modications to your bike
If you have any doubts about the process or consider yourself inexperienced when it comes to servicing and install-
ing components onto bikes, we recommend that a professional bike mechanic carries out such work. For safety
reasons, having a mechanic deal with your bike is the most sensible option.
5.3.1 Retrotting a dropper seatpost
The woom OFF and woom OFF AIR models from model years 2023 onward in size 5 (24″) and size 6 (26″) can be
retrotted with an internally routed dropper seatpost. Make sure you purchase the correct diameter and length
model as it needs to be compatible with your frame.
A
B
Size 5:
© Diameter: 27.2 mm
© Maximum insertion length (A): 220 mm
© Minimum insertion length (B): 60 mm
© Maximum saddle height: 845 mm (woom OFF) /
855 mm (woom OFF AIR)
Size 6:
© Diameter: 27.2 mm
© Maximum insertion length (A): 270 mm
© Minimum insertion length (B): 60 mm
© Maximum saddle height: 960 mm (woom OFF) /
970 mm (woom OFF AIR)

Table of Contents

Related product manuals