42 Instructions for use
EN
8 Recommended tightening torques
Please consult a mechanic or bike shop if you have any doubts or concerns about the tightness of your bolted
fastenings and connections or if you do not have a suitable tool to determine the correct tightness. The table below
details the torque specications for individual parts on your woom bike.
Part Tightening torque [Nm]
Bolts that clamp the stem to the steerer tube 6
Stem to handlebars 4.5
Locking bolt (bearing must be adjusted so that there is no play) 0.5–1.5
Brake lever to handlebars 4
MTB grips to handlebars 3
Trigger shifter to handlebars 4
Saddle rails (saddle to seatpost) 4
Front wheel thru-axle 15 (OFF)
Rear wheel thru-axle 10–15
Pedals 20
Brake caliper to frame 6
Cranks 40
9 Protecting the environment
9�1 Disposing of the packaging
The packaging materials have been selected with environmental compatibility and disposal in mind and are there-
fore almost completely recyclable. Recycling the packaging saves raw materials and reduces waste.
9�2 Disposing of your old bike
Old bikes often contain valuable materials. They also contain certain substances, mixtures and components that
were necessary for their function and safety. If not disposed of properly, they can be harmful to human health and
the environment. For this reason, do not dispose of your child’s old bike with your domestic waste. Instead, return
it to your local recycling collection point or take it to a bike shop.
To Next Page
Loading...
