Data output
211
12 Data output
The inoLab Level 3 terminal provides several options for
ouputting data.
l Output to the display
(Displaying measured values)
– numerical display of measured values (standard)
– graphical display of measured values (digital recorder)
l Output to the integrated printer
(on terminals with integrated printer only)
– printing graphical and numerical data
– printing on the digital recorder
l Output to the RS 232/REC interface
– printing numerical data on an external printer
– transmitting data to a PC, e.g. to be saved in a
database
– recording the data via an external analog recorder
You can output the following data:
l Graphical displays
l Alphanumerical displays
– Calibration records
– Stored measured values
– Stored system configurations
Alphanumerical data can be output as a legible text or
database-conform (data list separated by semicolons).
To Next Page
