Basic principles of operation
36
4.1.2 Softkey functions
The currently available softkey functions are displayed
above the corresponding softkeys.
Softkeys are displayed in italics and in square brackets, e.g.
[Menu].
p
Prints the current display contents
(right-hand softkey only)
[Menu] Switches to the Menu
mode (left-hand softkey only)
[ESC] Switches to the next higher menu level in the
Menu mode, or quits the Menu
mode (left-hand softkey only)
[Tab] Swaps between different displays that are
open at the same time (e.g. graphical
display - numerical measured value)
[Next] Switches between the different input fields
in an input window
[Ident] To input the ID of a measured value
[RCL menu] Opens a selection menu for stored
measured values
[Open] Opens a storage for input/output
[Start] Starts a measurement
[Ok] Completes the entries
[X] Deletes the selected entry
To Next Page
Loading...
