wtw Multi 3620 IDS User Manual

Multi 3620 IDS Operation
ba77169e01 04/2016 28
Setting the date,
time and date format
The date format can be switched from the display of day, month, year
(dd.mm.yy) to the display of month, day, year (mm/dd/yy or mm.dd.yy).
The date and time are reset to default after a fall of the supply volt-
age (empty batteries).
1 In the measured value display:
Open the Storage & config menu with <ENTER_>.
The instrument is in the setting mode.
2 Select and confirm the System / Clock function menu with <><>
and <ENTER>.
The setting menu for the date and time opens up.
3 Select and confirm the Time menu with <><> and <ENTER>.
The hours are highlighted.
4 Change and confirm the setting with <><> and <ENTER>.
The minutes are highlighted.
5 Change and confirm the setting with <><> and <ENTER>.
The seconds are highlighted.
6 Change and confirm the setting with <><> and <ENTER>.
The time is set.
7 If necessary, set the Date and Date format. The setting is made simi-
larly to that of the time.
8 To make further settings, switch to the next higher menu level with
<[ESC]>.
or
Switch to the measured value display with <M>.
The instrument is in the measuring mode.
Date format: dd.mm.yy
Date: 15.03.2016
Time: 14:53:40
Clock function
30.09.2015 08:00

wtw Multi 3620 IDS Specifications

General

Brand	wtw
Model	Multi 3620 IDS
Category	Measuring Instruments
Language	English