wtw Multi 3620 IDS - Menus and Dialogs

Multi 3620 IDS Operation
ba77169e01 04/2016 24
4.5.3 Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
The selection is done with the <><> keys. The current selection is dis-
played with a frame.
 Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with <ENTER>. Example:
 Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with <ENTER>. Subsequently,
the setting can be changed with <><> and <ENTER>. Example:
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <ENTER>. Example: Display the Calibration
record function.
General
Interface
Clock function
Service information
Reset
System
30.09.2015 08:00
Language: Deutsch
Acoustic signal: off
Volume 9
Illumination: on
Brightness: 12
Switchoff time: 1 h
Temperature unit: °C
Stability control
: on
General
30.09.2015 08:00