wtw Multi 3620 IDS - 13.4 Connecting a USB memory device;USB printer (USB-A interface (USB Host))

Multi 3620 IDS Transmitting data
ba77169e01 04/2016 98
13.4 Connecting a USB memory device/USB printer
(USB-A interface (USB Host))
Connect the USB-A interface (USB Host) of the Multi 3620 IDS to a USB flash
drive/USB printer.
Suitable USB printers:
13.5 Options for data transmission to the USB-B (PC) interface
and the USB-A (USB printer) interface
Via the USB-B interface you can transmit data to a PC. Via the USB-A inter-
face, you can transmit data to a USB printer or USB memory device. How to
transmit data to a USB memory device is described in an extra section (see
section 13.6).
The following table shows which data are transmitted to the interface in which
way:
1 Connect a USB memory device/USB printer to the USB Host interface.
2 For USB printer:
Connect the power pack to the Multi 3620 IDS (see section 3.3.2).
Model Type Paper width
Citizen CT-S281 Thermal transfer printer 58 mm
Seiko Instruments Inc. DPU-
S445
Thermal transfer printer 58 mm
Star SP700 with USB inter-
face*
* Recommended printer settings for Star SP700:
- CodePage 437
- DIP switch 1...7: =ON, DIP switch 8: OFF
Details: see operating manual of your printer.
Matrix printer 76 mm