wtw Multi 3620 IDS User Manual

Multi 3620 IDS Overview
ba77169e01 04/2016 8
1.2 Sensors
1.2.1 IDS sensors
IDS sensors
 support the automatic sensor recognition
 show only the settings relevant to the specific sensor in the setting menu
 process signals in the sensor digitally so that precise and interference-free
measurements are enabled even with long cables
 facilitate to assign a sensor to a measured parameter with differently colored
couplings
 have quick-lock couplings with which to fix the sensors to the meter.
Sensor data from
IDS sensors
IDS sensors transmit the following sensor data to the meter:
 SENSOR ID
– Sensor name
– Sensor series number
 Calibration data
 Measurement settings
The calibration data are updated in the IDS sensor after each calibration pro-
cedure. A message is displayed while the data are being updated in the sensor.
1.2.2 Wireless operation of IDS sensors
With the aid of the adapters in the IDS WLM System, IDS sensors with plug
head connectors (variant P) can be wirelessly connected to your
Multi 3620 IDS.
Information on available IDS sensors is given on the Internet.
In the measured value display, you can display the sensor name
and series number of the selected sensor with the [Info] softkey.
You can then display further sensor data stored in the sensor with
the [More] softkey (see section 4.1.6 S
ENSOR INFO).
Further information on the wireless operation of IDS sensors:
 Web resources
 Operating manual of the IDS WLM System.

wtw Multi 3620 IDS Specifications

General

Brand	wtw
Model	Multi 3620 IDS
Category	Measuring Instruments
Language	English