wtw Multi 3620 IDS User Manual

Multi 3620 IDS Settings
ba77169e01 04/2016 86
11.6.2 Data storage
This menu contains all functions to display, edit and erase stored measured
System / General / Illumination Auto
on
Switches the display illumination on/off
System / General / Brightness 0 ... 15 ... 22 Changes the display brightness
System / General / Switchoff time 10 min ... 1h ... 24
h
Adjusts the switch-off time
System / General / Temperature
unit
°C
°F
Temperature unit,
degrees Celsius or degrees Fahrenheit.
All temperature values are displayed with
the selected unit.
System / General / Stability con-
trol
on
off
Switches on or off the automatic stability
control during measurement (see section
11.6.3)
System / Interface / Baud rate 1200, 2400, 4800,
9600, 19200
Baud rate of the USB device interface
System / Interface / Output format ASCII
CSV
Output format for data transmission
For details, see section 13
System / Interface / Decimal sep-
arator
Dot (xx.x)
Comma (xx,x)
Decimal separator
System / Interface / Output
header
Output of a header for Output format:
CSV
System / Interface / Extended Oxi
output
The measured values for the parameters
concentration (mg/l ) and saturation (%)
are output together.
The function is active if the following
requirements are met:
 a D.O. sensor is connected
 The D.O. sensor displays the parame-
ter concentration (mg/l) or saturation
(%)
 the Output format CSV is set
System / Clock function Date format
Datum
Time
Settings of time and date.
For details, see section 4.5.5
System / Service information Hardware version and software version
of the meter are displayed.
System / Reset - Resets the system settings to the default
values.
For details, see section 11.7.2
Menu item Setting Explanation

wtw Multi 3620 IDS Specifications

General

Brand	wtw
Model	Multi 3620 IDS
Category	Measuring Instruments
Language	English