wtw Multi 3620 IDS - 4.2 Switching on the meter

Multi 3620 IDS Operation
ba77169e01 04/2016 20
4.1.7 Display of several sensors in the measuring mode
The measured values of the connected sensors can be displayed in the follow-
ing ways:
 Clear display of all connected sensors
 Detailed display of one sensor
(e.g. incl. CMC feature with pH sensors)
With the softkey you can very easily switch between the two display types. The
suitable softkey is displayed depending on the operating situation.
4.2 Switching on the meter
2 Display further sensor data (settings) with [More].
30.09.2015 08:00
Man. temperature:
25 °C
pH resolution 0.001
mV resolution 0.1
Buffer TEC
Calibration interval 7d
Unit for slope mV/pH
QSC:
Software version 1.0
SenTix 940
B092500013
30.09.2015 08:00
Info
30.09.2015 08:00
Info
1 Switch the meter on with <On/Off>.
The meter performs a self-test.