Operation Multi 3620 IDS
25 ba77169e01 04/2016
Messages
Information is marked by the [
i
] symbol. It cannot be selected. Example:
4.5.4 Navigation example 1: Setting the language
The principles of navigation are explained in the two following sec-
tions by reference of examples:
Setting the language (section 4.5.4)
Setting the date and time (see section 4.5.5).
1 Press the <On/Off> key.
The measured value display appears.
The instrument is in the measuring mode.
Calibration record
Calibration data storage
Buffer: TEC
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[
i
] 2.00 4.01 7.00 10.01 (25 °C)
pH
30.09.2015 08:00
Calibration record
Calibration data storage
Buffer: TEC
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[
i
] 2.00 4.01 7.00 10.01 (25 °C)
pH
30.09.2015 08:00
To Next Page
Loading...
