wtw Multi 3620 IDS User Manual

Multi 3620 IDS Data memory
ba77169e01 04/2016 94
12.3 Measurement data memory
12.3.1 Editing the measurement data memory
The contents of the manual or automatic measurement data storage can be
shown on the display.
Each of the measurement data memories has a function to erase the entire
contents.
Editing the data
memory
The memory is edited in the menu, Storage & config/ Data storage. To open the
Storage & config menu, press the <ENTER_> key in the measured value dis-
play.
Open the manual or automatic storage directly with the <RCL> or <RCL_> key.
Settings
The settings are explained here using the manual data memory as
an example. The same settings and functions are available for the
automatic data memory.
Menu item Setting/
function
Explanation
Data storage /
Manual data storage
/
Display
- Displays all measurement datas-
ets page by page.
Further options:
 Scroll through the datasets
with <><>.
 Output the displayed dataset
to the interface with .
 Quit the display with <[ESC]>.
Data storage /
Manual data storage
/ Output to USB flash
drive or printer
- Outputs all stored measurement
data to a connected USB flash
drive / USB printer.
Data storage /
Manual data storage
/ Output to RS232/
USB
- Outputs all stored measurement
data to the interface.
Data storage /
Manual data storage
/
Erase
- Erases the entire manual mea-
surement data memory.
Note:
All calibration data remain stored
when this action is performed.

wtw Multi 3620 IDS Specifications

General

Brand	wtw
Model	Multi 3620 IDS
Category	Measuring Instruments
Language	English