To Next Page

To Previous Page

Data memory Multi 3620 IDS

93 ba77169e01 04/2016

Starting the

automatic storing

function

To start the automatic storing function, select continue with <><> and con-

firm with <ENTER>. The meter switches to the measured value display.

The active automatic data storing function can be recognized by the progress

bar in the status line. The progress bar indicates the remaining storage dura-

tion.

Terminating the

automatic storage

function

prematurely

Proceed as follows to switch off the automatic data storing function before the

adjusted storing duration has expired:

1 Remaining storing duration

2 Graphical display of the storing duration

If the automatic data storage function is activated, only the follow-

ing keys are active: <M><STO_> and <On/Off>. The other keys

and the automatic switch-off function are deactivated.

0d03h00min

03.04.2016 08:00

1 Press the <STO_> key.

The following window appears.

2 Using <><>, select yes and confirm with <ENTER>.

The meter switches to the measured value display.

The automatic data storing function is terminated.

Stop automatic storage?

yes

Warning

30.09.2015 08:00

wtw Multi 3620 IDS User Manual

Questions and Answers: