To Next Page

To Previous Page

Data memory Multi 3620 IDS

91 ba77169e01 04/2016

12 Data memory

You can transmit measured values (datasets) to the data memory:

 Manual storage (see section 12.1)

 Automatic storing at intervals (see section 12.2)

Each data storing process transmits the current dataset to the interface at the

same time.

12.1 Manual storage

You can store a measurement dataset to the data memory as follows. The

dataset is at the same time output to the interface:

If the memory is full When all storage locations are occupied, it is not possible to continue storing.

Then you can e.g. transmit the stored data to a PC or a USB flash drive (see

section 12.3.1) and subsequently erase the storage (see section 12.3.2).



12.2 Automatic data storage at intervals

The storing interval (Interval) determines the time interval between automatic

data storing processes. Each data storing process transmits the current data-

set to the interface at the same time.

1 Press the <STO> key shortly

The menu for manual data storage appears.

2 If necessary, change and confirm the ID number (1 ... 10000) with

<><> and <ENTER>.

The dataset is stored. The meter switches to the measured value dis-

play.

15.03.2016 11:24:16

pH 7.000 24.8

°C AR +++

ID number:1

continue

Manual data storage 4 von 500

30.09.2015 08:00

wtw Multi 3620 IDS User Manual

Questions and Answers: