wtw Multi 3620 IDS User Manual

Operation Multi 3620 IDS
27 ba77169e01 04/2016
4.5.5 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated in
the status line of the measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
 Current date and time
 Calibration date
 Identification of stored measured values.
Therefore, check the time at regular intervals.
7 Open the setting mode for the Language with <ENTER>.
8 Select the required language with <><>.
9 Confirm the setting with <ENTER>.
The meter switches to the measuring mode.
The selected language is active.
Language: Deutsch
Acoustic signal: off
Volume 5
Illumination: on
Kontrast: 50 %
Switchoff time: 1 h
Temperature unit: °C
Stability control: on
General
30.09.2015 08:00
Language: Deutsch
Acoustic signal: off
Volume 5
Illumination: on
Brightness: 50 %
Switchoff time: 1 h
Temperature unit: °C
Stability control: on
General
30.09.2015 08:00

wtw Multi 3620 IDS Specifications

General

Brand	wtw
Model	Multi 3620 IDS
Category	Measuring Instruments
Language	English