wtw Multi 3620 IDS User Manual

Operation Multi 3620 IDS
23 ba77169e01 04/2016
Forgotten the
password?
Contact the administrator.
4.5 Navigation
4.5.1 Operating modes
4.5.2 Measured value display
In the measured value display, you can
 use <><> to select one of several connected sensors. The selected
sensor is displayed with a colored background.
The following actions / menus refer to the selected sensor
 open the menu for calibration and measurement settings with <ENTER>
(short
keystroke)
 open the Storage & config menu with the sensor-independent settings with
<ENTER_> (long
pressure (approx. 2 s) on <ENTER>).
 change the display in the selected measuring screen (e. g. pH <-> mV) by
pressing <M>.
4 Using <><>, select the menu item, Change password and confirm
with <ENTER>.
5 In the Password field, enter the old password with <><> and
<><>and confirm it with <ENTER>.
6 In the New password field, enter the new password with <><> and
<><>and confirm it with <ENTER>.
The password is changed.
The login takes place. If a sensor is connected the measured value dis-
play appears.
Operating
mode
Explanation
Measuring The measurement data of the connected sensor are shown
in the measured value display
Calibration The course of a calibration with calibration information, func-
tions and settings is displayed
Storing in
memory
The meter stores measuring data automatically or manually
Transmit-
ting data
The meter transmits measuring data and calibration records
to a USB-B interface automatically or manually.
Setting The system menu or a sensor menu with submenus, set-
tings and functions is displayed

wtw Multi 3620 IDS Specifications

General

Brand	wtw
Model	Multi 3620 IDS
Category	Measuring Instruments
Language	English