149
XAG AUSTRALIA
ADVANCED SETTINGS
Operation Range
-
Shuttle Mode
Allows the user to customize which routes to operate. For
example, based on the parameters of the Operation Route,
if a field has 10 routes, the user can selectively operate on
Route 1-3, 4-5, etc. This provides flexibility in planning and
executing specific tasks within the designated area.
-
Boundary Mode
When enabled, this setting activates targeted application
(spray or spread) along the boundaries of the field or
operation area.
Operation Range
-
ALL OFF
Disables terrain following.
-
ALL ON (RECOMMENDED)
Enables terrain following for both approaching and
operation routes.
-
Approaching Route Only
Enables terrain following only during the approach route.
-
Operation Routes Only
Enables terrain following only during the main operation.
Obstacle Avoidance
The Effectiveness and ability of the obstacle radar to detect and
avoid obstacles is dependent on various factors, including the
obstacle's material, location, shape, size, etc. It may not function
effectively with all types of obstacles. It is essential to maintain a
visual line of sight with the equipment during operation. Pay close
attention to its flight and be prepared to operate the aircraft
manually to avoid obstacles promptly or during an emergency.
Relying solely on the obstacle radar without proper vigilance may
lead to unexpected risks.
-
Enable
Activates obstacle avoidance.
-
Disable
Weactivates obstacle avoidance.
Route Optimization for Reloading
-
Enable
Activates route optimization for efficient reloading.
-
Disable
Deactivates route optimization, following the standard
route.
ℹ
IMPORTANT
To Next Page
Loading...
