167
XAG AUSTRALIA
Tubing Monthly
Ensure the Tubing retains its original shape and elasticity.
Inspect for any signs of wear, cracks, or deformations. If
the tubing has expanded or elongated due to the effects of
potent chemicals, replace it to maintain a consistent flow
rate.
Gearing Monthly
Ensure the Gearings are in good condition and free from
damage or excessive wear. Regularly lubricate the gears
to ensure smooth operation and reduce wear. Check for
any misalignments or grinding sounds during operation.
Cables Every 2 Months
Ensure the Cables are free from damage, fraying, or kinks.
Regularly inspect the insulation for any signs of wear or
damage, and ensure connectors are clean and securely
fastened.
Screws Every 2 Months
Ensure all Screws are securely in place, free from rust, and
not stripped. Periodically tighten any screws that may have
become loose over time.
To Next Page
