XAG AUSTRALIA
98
04. Set DATUM: Once in the details section, tap on "Set DATUM." This action configures the
necessary parameters for the RTK Base Station.
05. Configure GPS Positioning: Navigate to the "GPS Positioning" menu and select the "GPS single
point positioning" option. This setting enables precise location tracking for your RTK Base
Station.
06. Wait for RTK4 to Reach the Correct Mode: Monitor the RTK Positioning status and patiently wait
for it to enter the "Normal (FIX)" Mode. This mode signifies that the RTK4 is functioning optimally
and is ready for the next steps.
To Next Page
Loading...
