Warning
Before you begin the procedure, ensure that the machine has been allowed to cool down.
Failure to do so may result in burns if certain parts of the machine are touched.
1. Replace the toner cartridge while the machine is on. Open the toner cover, located
just above the machine front door.
2. Lay paper on the floor before removing the cartridge. This will allow any excess
toner to fall on the paper. Hold the handle of the color indicated in the message,
and gently pull it out.
3. Remove the toner cartridge by holding the handle on the top of the cartridge while
gently pulling it straight out. Be careful to not get toner on clothing.
4. Dispose the toner cartridge as normal office waste or recycle the cartridge.
5. Remove the new toner cartridge from its packaging.
6. Gently tilt the new cartridge up and down, and then left and right to redistribute
the toner.
7. Install the toner cartridge by aligning the arrows on the cartridge evenly with the
printer until you hear a click.
Xerox
®
Color C60/C70 Printer9-6
User Guide
Maintenance
To Next Page
Loading...
Need help?
General
