FreeFlow Process Manager Operator and Administrator Guide
2-94
Workflow Builder
Guidelines for Cell Clustering
A cell is the area on a sheet occupied by a multipage imposition
scheme. Cell Clustering provides the option of pulling together
cells on a sheet in a way that results in cell sizes that contain the
imposed page images with no waste space between cells. The
Cell Cluster is positioned and aligned as a single entity.
• Cell Clustering is not available for Standard and Signature job
types. The cells in a signature job configuration are pulled
together using the “Binding-edge” alignment option.
• With Autofit off it is possible to yield cell sizes that when
clustered, produce a layout area that exceeds the dimensions
of the paper stock. As a result, only a portion of the NxN cell
matrix may appear on the cell with the rest of the cells partially
or completely clipped by the defined paper stock size.
• The position and alignment controls control the cell cluster.
The ability to justify content within a cell is lost. All content is
justified top-left within a cell.
• With Cell Clustering OFF, the imposition entities being
controlled are the individual page images with respect to
position, alignment, and autofit. With Cell clustering ON, the
entity being controlled is the entire cluster of cells.
To Next Page
Loading...
Need help?
General
