Xerox VersaLink B415 - Adjusting the Paper Guides in the 550-Sheet Adjustable Trays

ADJUSTING THE PAPER GUIDES IN THE 550-SHEET ADJUSTABLE TRAYS
You can adjust the paper guides in Trays 1–4 to accommodate standard or custom paper sizes. In the standard
position, the guides move into the supported standard paper settings. You can use the Paper Size Preference feature
to set the preferred paper size to inches or metric. Paper size options that use the selected units setting appear at
the top of the Paper Selection list on the Print tab and User Interface.
• IInncchheess: This option sets the paper-size preference to display Imperial sizes first.
• MMeettrriicc: This option sets the paper-size preference to display Metric sizes first.
The Measurement Units can be set to Inches or Metric. To set a custom size in the control panel, you can select
from the following options for different measurement units:
• 0.1 in., if the measurement unit is set to Inches or
• 1 mm, if the measurement unit is set to Metric
To move the paper guides from the standard to the custom paper-size position:
1. Pull out the tray until it stops.
2. Remove any paper from the tray. Pinch the guide levers, then move the length or width guides outward until
they stop.
Xerox
®
VersaLink
®
B415 Multifunction Printer User Guide 203
Paper and Media