• When Universal Print is enabled, the configuration settings appear. The Universal Print area displays the
registration status of your device.
• When Universal Print is disabled, the configuration settings are hidden. The Universal Print area shows the status
Off. This status is the default.
For information about configuring a device for Universal Print, refer to the System Administrator Guide at www.
xerox.com/office/VLB415docs.
CONNECTING TO A TELEPHONE LINE
A standard one-line fax is available with your printer.
CCaauuttiioonn:: To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger
telecommunication line cord.
1. Ensure that the printer is powered off.
2. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger to the Line port on the back of
the printer.
3. Connect the other end of the RJ11 cable to an operating telephone line.
4. Power on the printer.
5. Enable and configure the Fax functions.
62
Xerox
®
VersaLink
®
B415 Multifunction Printer User Guide
Getting Started
To Next Page
Loading...
