Xerox VersaLink B415 - Loading Paper

Loading Paper
LOADING PAPER IN TRAYS 1–4
The system administrator can set 550-sheet standard trays, Trays 1–4, to Fully Adjustable mode or Dedicated
mode. Each time a tray is opened and closed, the paper settings appear on the control panel.
• When trays are configured as Fully Adjustable, you can confirm or change the media settings.
• When trays are configured as Dedicated, the control panel displays the media settings for the tray.
Note: Only the system administrator can change the media settings for a dedicated tray. For details on how
to configure tray settings, refer to Configuring Paper Tray Settings.
When a tray is empty, a notification appears at the bottom of the control panel.
Do the following to load paper in Trays 1–4, where:
• Tray 1: Standard 550-sheet Tray
• Trays 2–4: Optional 550-sheet Trays
1. Pull out the tray until it stops.
2. Remove any paper that is a different size or type.
200
Xerox
®
VersaLink
®
B415 Multifunction Printer User Guide
Paper and Media