Xerox WorkCentre 5945 User Manual

General Care and Troubleshooting WorkCentre
®
5945/5955
716 User Guide
Pages are out of sequence or upside down when the Booklet Creation feature
is used
• Ensure that the originals are in the correct sequence.
• Feed LEF originals to SEF orientated paper.
• Enable the display options for Booklet Creation and ensure that the correct sequence is
selected (i.e. Left to Right or Right to Left).
Note: SEF is Short Edge Feed (where the short edge of the paper is the leading edge when the paper
is fed into the device). LEF is Long Edge Feed (where the paper is oriented so that the long edge is
fed into the device first).
More Information
Preparing Copies to be made into a Booklet
Creating a Booklet Layout using the PCL Print Driver
Creating a Booklet Layout using the PostScript Print Driver
Creating a Booklet Layout using the XPS Print Driver
Folding Booklets using the Mac Print Driver
The output is blank
• Ensure the originals are loaded either face up in the document feeder or face down on the
document glass in the top right position.
• Ensure the Xerographic Module is seated and turning correctly.
More Information
Loading Documents
There are streaks, lines or spots on the prints
• Clean the document glass and, if using the document feeder, also clean the Constant Velocity
Transport glass (the thin strip of glass to the left of the document glass), especially near the
plastic ramp on the glass.
• Clean the white underside of the document feeder/document cover.
• Clean the document feeder roller.
• Clean the halo guide.
• Clean the Charge Scorotron and Transfer Corotron, if available on your device.
• Check the paper tray guides are against the paper stack.
• Run the job from the document glass.
• Check the quality of the original. Use Edge Erase to remove lines from the edges of the
document.
• Use the Background Suppression feature.
•Load fresh paper.
• Do not use heavily embossed paper.
More Information
Erasing Edges from Copies
Setting the Background Suppression for Copies
Cleaning the Control Panel, Touch Screen, Document Feeder and Output Trays
Cleaning the Document Glass and Both Constant Velocity Transport Glass Strips

Xerox WorkCentre 5945 Specifications

General

Print Technology	Laser
Print Speed	Up to 45 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Maximum Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Copy Speed	Up to 45 cpm
Copy Resolution	600 x 600 dpi
Processor	1.2 GHz Dual-core
Memory	2 GB
Fax	Optional
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Connectivity	USB, Ethernet
Paper Size	A4, A5
PDL	PCL6, PDF, XPS, TIFF, JPEG
Mobile Printing	Apple AirPrint
Dimensions	640 x 700 x 1140 mm
Scanner Type	ADF, Flatbed
Weight	Approx. 172.0 lb / 78 kg