Xerox WorkCentre 6027

Maintenance
Xerox
®
WorkCentre
®
6027 Multifunction Printer 163
User Guide
Performing a Manual Color Registration Adjustment
Color Registration adjusts the printer to make corrections to blurry or hazy prints, or prints with color
halos.
To perform a color registration adjustment:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Service Tools.
5. Touch Color Registration.
6. Touch Print Registration Chart.
7. Touch Print.
8. Starting with the left side calibration lines, circle the line in each group where the color bar aligns
with the adjacent black bars.
9. Repeat the process for the right side calibration lines, RY, RM, and RC.
10. Align a straight edge through the middle of the white zone in each of the PY, PM, and PC charts.
There is a number at the end of each chart that represents the middle of the white zone. Find the
number for the middle of the white zone and circle it.