Xerox WorkCentre 6027 - Configuring General Settings

Installation and Setup
Xerox
®
WorkCentre
®
6027 Multifunction Printer 57
User Guide
Configuring General Settings
This section includes:
• Accessing the General Settings Menu ......................................................................................................................... 57
• Configuring the Power Saver Timers ........................................................................................................................... 57
• Setting the Date and Time .............................................................................................................................................. 58
• Setting the Measurement Units .................................................................................................................................... 58
• Setting the Display Brightness ....................................................................................................................................... 58
• Configuring Audio Tones .................................................................................................................................................. 59
• Configuring OffHook Wake Up ...................................................................................................................................... 59
• Enabling the Fax Server Address Book ........................................................................................................................ 59
• Enabling the Email Server Address Book .................................................................................................................... 59
• Setting the Paper Size/Type Error Alert ...................................................................................................................... 60
Use this menu to configure general settings of the printer. For example, time to Energy Saver mode,
alarm settings, and so on.
Accessing the General Settings Menu
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
Configuring the Power Saver Timers
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Power Saver Timer.
5. Touch either Low Power Timer or Sleep Timer.
6. To increase or decrease the number of minutes before the printer enters Power Saver mode, touch
the Plus (+) or Minus (-) buttons, then touch OK.
7. To return to the General menu, touch the Back arrow.