Xerox WorkCentre 6027 User Manual

Installation and Setup
54 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
Configuring Printer Defaults
The Printer Defaults page displays the printer model information and product code or serial number. It
also provides a place to enter the name and location of the printer and the name and email address of
the contact.
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
2. In CentreWare Internet Services, click Properties.
3. To expand the menu, in the Properties pane, for the General folder, click the plus symbol (+).
4. Click Printer Defaults.
5. In the fields, type descriptive information as needed.
6. Click Save Changes.
Resetting the Printer
Using Software Resets to restart the printer is faster and wastes fewer consumables than powering the
printer on and off. Restarting the printer can take up to five minutes during which time CentreWare
Internet Services is not available.
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
2. In CentreWare Internet Services, click Properties.
3. To expand the menu, in the Properties pane, for the General folder, click the plus symbol (+).
4. From the General menu, click Resets.
5. To reset the network memory and restart the printer, for Reset network memory and restart the
printer, click Start Printer.
6. To restart the printer without resetting any of the default settings, for Restart the printer, click Start
Printer.

Xerox WorkCentre 6027 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 2400 dpi
Maximum Paper Size	8.5 x 14 in
Duplex Printing	Manual
Monthly Duty Cycle	30, 000 pages
Functions	Print, Copy, Scan, Fax
Paper Capacity	150 sheets
Processor Speed	525 MHz
Memory	512 MB
Connectivity	Ethernet, Wi-Fi
Mobile Printing	Apple AirPrint, Google Cloud Print